Archive for January 2012
unlighted river
– photo by Mitch Waxman
Another DonJon tug is in the spotlight today, this time it’s the Paul Andrew. It’s pictured above at Port Elizabeth Newark, moving a barge past one of the gargantuan cargo docks which distinguish the place.
from wikipedia
The Port of New York was really eleven ports in one. It boasted a developed shoreline of over 650 miles (1,050 km) comprising the waterfronts of Manhattan, Brooklyn, Queens, the Bronx, and Staten Island as well as the New Jersey shoreline from Perth Amboy to Elizabeth, Bayonne, Newark, Jersey City, Hoboken and Weehawken. The Port of New York included some 1,800 docks, piers, and wharves of every conceivable size, condition, and state of repair. Some 750 were classified as “active” and 200 were able to berth 425 ocean-going vessels simultaneously in addition to the 600 able to anchor in the harbor. These docks and piers gave access to 1,100 warehouses containing some 41,000,000 square feet (3,800,000 m2) of inclosed storage space.
The SS Normandie arriving in New York Harbor on maiden voyage escorted by several tugboats.
In addition, the Port of New York had thirty-nine active shipyards, not including the huge New York Naval Shipyard on the Brooklyn side of the East River. These facilities included nine big ship repair yards, thirty-six large dry-docks, twenty-five small shipyards, thirty-three locomotive and gantry cranes of fifty ton lift capacity or greater, five floating derricks, and more than one hundred tractor cranes. Over 575 tugboats worked the Port of New York.
– photo by Mitch Waxman
These shots were acquired while onboard one of the many Working Harbor Committee tours of industrial Newark Bay and environs in September of 2011, which explains the glorious lighting.
Autumn is one of the times of the year in New York City during which the angle of the sun creates a golden orange “theatrical lighting” effect.
from wikipedia
The port consists of a complex of approximately 240 miles (386 km) of shipping channels as well as anchorages and port facilities. Most vessels require pilotage and larger vessels require tugboat assistance for the sharper channel turns. The natural depth of the harbor is about 17 feet (5 m), but it had been deepened over the years, to about 24 feet (7 m) controlling depth in 1880.[12] By 1891 the Main Ship Channel was minimally 30 feet (9 m). In 1914 Ambrose Channel became the main entrance to the Harbor, at 40 feet (12 m) deep and 2,000 feet (600 m) wide. During World War II the main channel was dredged to 45 feet (14 m) depth to accommodate larger ships up to Panamax size. Currently the Corps of Engineers is contracting out deepening to 50 feet (15 m), to accommodate Post-Panamax container vessels, which can pass through the Suez Canal. This has been a source of environmental concern along channels connecting the container facilities in Port Newark to the Atlantic. PCBs and other pollutants lay in a blanket just underneath the soil. In June 2009 it was announced that 200,000 cubic yards of dredged PCBs would be “cleaned” and stored en masse at the site of the former Yankee Stadium, as well as at the Brooklyn Bridge Park. In many areas the sandy bottom has been excavated down to rock and now requires blasting. Dredging equipment then picks up the rock and disposes of it. At one point in 2005 there were 70 pieces of dredging equipment working to deepen channels, the largest fleet of dredging equipment anywhere in the world.
– photo by Mitch Waxman
Writing this in the depth of frozen January, your humble narrator literally aches for the shirt sleeve warmth and long hours of sunlight offered during other seasons. The “photographer’s way” of course is to adapt, improvise, and “get it”, of course- but I truly pine for warmer (and brighter) times right now.
Built in 1968, by Breaux’s Bay Craft of Loreauville, Louisiana as the tug Miss Holly.
The tug was later acquired by DonJon Marine of Hillside, New Jersey where she was renamed as the Paul Andrew.
She is a twin screw tug powered by two Cummins KTA 19-M3 main engines with two Twin Disc MG 516 reduction gears at a ratio of 6:1 turning two 19(ft) 304 stainless steel 5 1/2 diameter 62(in) by 46(in) propellers for a rated 1,200 horsepower. Her electrical service is provided by two 30 kw generators driven by DD 3-71 engines 120-208 Triple Phase.
– photo by Mitch Waxman
The shot of the Paul Andrew above is from a Working Harbor trip even earlier in the year, August as a matter of fact. As a note, it is hitched up to a different sort of barge, and is tied up in a “on the hip” configuration.
Man, I can’t wait for the thaw.
from donjon.com
DIMENSIONS
Length Overall: 68 ft./ 20.73 m
Length Design Load Waterline: 63.6 ft./ 19.39 m
Beam Molded Amidships: 23.0 ft./ 7.01 m
Depth Molded to Main Deck: 9.0 ft./ 2.74 m
Tonnage (Gross): 99 GRT
Tonnage (Net): 67 NRT
CONSTRUCTION
All Steel
PROPULSION & STEERING
Main Engines: (2) Cummins KTA 19-M3 1,200 bhp
Propellers: (2) 19 ft. 304 Stainless Steel, 5½ diameter, 62 inch x 46 inch
Gears: Twin Disc MG 516, 6:1 Ratio
Rudders: (2) Spade
Steering Stations: Pilothouse, Upper Wheelhouse, Aft
PERFORMANCE
Speed (Free Route): 10 knots
Speed (Cruising): 8 knots
Bollard Pull:12 tons
Fuel Use/Range (Towing): 41 gph / 17 days
Fuel Use/Range (Cruising): 25 gph / 28 days
broad roofs
– photo by Mitch Waxman
On of the many corporate giants which distinguished Long Island City (at the start of the last century) was known as Waldes Koh-I-Noor. Located at the corner of Anable Avenue and Creek Street (which is the modern day 27th street and Austell Pl.), the firm was a manufacturer of dress fasteners (snaps, zippers and the like) and was known to produce all sorts of metallic devices- including war munitions, apparently.
from google books
Henry Waldes New York has leased the factory of the Klndel Bed Co Anable Avenue and Creek Street Long Island City NY comprising a four story reinforced concrete structure for the establishment of a new plant for the manufacture of small metal specialties The lease is for a term of years and aggregates $350,000
– photo courtesy google books, from: Queens Borough, New York City, 1910-1920: The Borough of Homes and Industry
A large employer, the building they were housed in is actually a complex of structures which had a rail spar leading to it. Not to be confused with the mechanical pencil manufacturers, or the legendary diamond which the company named itself after, this was an international company which had to end its operations in Europe because of the Nazi witch hunt for members of the Jewish faith.
from google books
STATEMENT OF WALDES & CO INC LONG ISLAND CITY NY The undersigned is the largest manufacturer of snap fasteners in the world and since 1918 have been established in the United States our plant being located at Long Island City NY. The original factory is located at Prague Czechoslovakia which employs about 4,000 men while our American plant now employs from 150 to 200 men Both these factories are equipped with up to date machinery and each one produces the same finely finished metal snap fasteners These fasteners are made either bright finish or enameled Our system of manufacturing and the articles themselves are our own inventions protected by patents by nearly every country.
– photo by Mitch Waxman
The structure survives, and like many of the gargantuan factories which distinguish the Long Island City landscape, it has been subdivided amongst several smaller tenants in modernity. Part of the building is used an NYPD impounded property facility, another section is used by a doggy day care company.
– photo by Mitch Waxman
From what I’ve been able to discern, the company remained in Waldes family tender for most of the 20th century, and seems to have been dissolved sometime in the latter third. There are literally hundreds of extant patents which were established by both the family and its enormous staff.
– photo by Mitch Waxman
References in historic records describe a late in the game shift to tool and die manufacture, no doubt to exploit this catalogue of patents. The Sears catalog business carried several of their milliners supplies, and I’m told that they innovated the all plastic zippers which came into vogue during the second world war and beyond, largely due to metals shortages.
from nytimes.com
Harry K. Waldes, chairman of the board of Waldes Kohinoor Inc. in Long Island City, Queens, died Tuesday in North Shore University Hospital, Manhasset, L.I., after suffering a stroke. He was 73 years old and a resident of Great Neck, L.I.
Mr. Waldes became executive vice president of the concern, which manufactures fastening devices and tools, in 1950.
He was named board chairman in 1961.
– photo courtesy google books, from: Queens Borough, New York City, 1910-1920: The Borough of Homes and Industry
Local realtors found it a devilish proposition, selling the large structure well after the golden age of American manufacturing had passed, and it was Pinnacle Realty who came up with the notion of subdividing the structure and leasing it piecemeal. Pinnacle is still a familiar name in LIC realty circles today.
from pinnaclereny.com
As the exclusive agent for the 100 year old Waldes Kohinoor Company located in Long Island City; Gary came up with the concept that the parts are worth more than the whole. Early in the marketing campaign Gary focused on selling the 3 buildings totaling 200,000 sq. ft. plus 50,000 sq.ft. of land to a single developer. He was disappointed with the offers being submitted by developers. However, if the property was sold off as 4 separate parcels millions of dollars in additional proceeds for ownership could be generated. The strategy worked extremely well and the Waldes Kohinoor ownership was very satisfied with the results.
songs and dreams
– photo by Mitch Waxman
One of my pedantic philosophies, oft repeated to European relatives and acquaintances, is “We all know the uncomfortable truth of America, but it’s the myth that we need to believe in”. This sort of sophistry has always been the provence of artists and bohemians, radicals and writers- not the average joe.
Lately, it seems that the myth has been left out of the curriculum, and that it’s the patients who are running the asylum. Everyone I talk to, it seems, is disillusioned- in the literal sense of the word.
– photo by Mitch Waxman
As slave masters go, the fellow depicted in the sculpture above- which sits at the foot of a bridge in Brooklyn- seems to been an ok one, at least according to oral tradition and learned opinions.
Can you be a good slave master though?
That’s the truth.
Cannot tell a lie, honor and fealty, liberty and justice for all.
That’s the myth, and I’ll take it.
– photo by Mitch Waxman
It would be childish to not discuss the state of perpetual and unending war, or the inequity of a system that punishes the weak and wounded. One may not forget about original sin, or betrayed friends, or the vagaries of jingoism. What we may not forget is the myth.
I think it’s really important to try and remember about Superman, and Captain America too.
oily river
– photo by Mitch Waxman
Recently witnessed, the Reinauer Towing tugboat Matthew Tibbets maneuvering a fuel barge through the languid expanse of the legend choked Newtown Creek.
Just a short one today, still playing catch up from a recent bout with some unknown and untrammeled organism, which is best thought of as some mere virus.
Project Firebox 28
– photo by Mitch Waxman
Hipper than thou, this guardian of the realm is found on the nebulous border betwixt Williamsburg and Greenpoint. As evinced in the shot above, the stalwart nobility of the scarlet sentinel is quite irresistible to the attention of North Brooklyn’s ladies.
The fairer sex is never immune to the power of uniforms, it would seem.
The Newtown Pentacle 